Glide waxing is much more common than grip waxing, as now days the majority of skiers use alpine skis, snowboards or wax less cross-country skis.Good quality wax less cross-country skis have gripping surfaces that eliminate the need to apply grip ski wax.

Paste waxing is a much quicker but can be a lot more expensive than hot waxing. When you purchase a can of paste it generally comes with an applicator included. Using the applicator the applicator tip you spread and smear the ski wax onto the base of the ski.When you have done this properly and thoroughly you use a cork to buff in the paste into the ski base by heating it up with friction to create a mild hot ski wax effect.When you have finished doing this you use a nylon brush to remove excess ski wax and create a pristine gliding surface.

Paste, liquid, spray-on, and rub-on waxing are definitely the easiest waxing methods.All that you have to do is smear, rub, spray or apply a thin layer liquid ski wax onto the base of the ski using a paint brush and let the wax dry before buffing it into the ski base with a waxing cork.Its believed that ski wax applied with these methods give the least performance and need to be performed frequently. This however is not so true. Liquid and spray waxes provide better coverage than solid wax applied with an iron.

Hotboxing is applying a ski wax to a ski base with an iron and then warming the skis in a device called a hotbox. Hotboxes open up the pores in the ski pretty much like a sauna does to the pores in the human body. This results in the applied ski wax  penetrating the base of the ski deeper and more effectively, creating a even faster gliding surface.  Hotboxes can be home made — an insulated box with a heater is the basic setup — or purchased on the open market made by commercial manufacturers.

Ski Wax

How To Ski Wax

Hot waxing is the most tedious of applications but by far gives the best results. Choose the ski wax which you wish.Now with the ski wax iron heat the wax and allow the melted ski wax to drip over the base of the ski.Now with the iron iron over the ski base so the melted wax begins to penetrate into the base of the ski. Softer waxes for warmer conditions require lower iron temperatures than harder waxes because colder conditions require higher ski iron temperatures.The ironing temperature for a  wax is often listed on its packaging.When the ski base has cooled any excess wax is scrapped off.Then the ski is brushed with coarse metal brushes, then softer nylon and horse hair brushes to create a smooth and fast base. Fluorinated wax can also then be used to give even better results.

To begin the process of ski wax waxing the skis the skis must first be cleaned using a specially formulated ski wax remover. Doing this ensures the ski has a smooth

2009 ski wax                                             site map                                          contact:garnett65@hotmail.com

base as any dirt or old ski wax is removed. So now you have a bare ski base free of anything that will interfere with the application of the new wax.